Name: Little Big Men Studio: Medieval Barding and Shield Transfers #4 for Victrix
Brand: Victrix LTD
SKU: 294637
Price: 179.0 SEK
Availability: LimitedAvailability

Little Big Men Studio: Medieval Barding and Shield Transfers #4 for Victrix

LBMS drivs och distributeras numera Victrix Ltd. Då sortimentet är väldigt stort fokuserar vi inledningsvis på transers till Victrix mest populära sett men vill du ha några andra transfers från LBMS får du mer än gärna maila oss så kan vi ta in dem åt dig.

Tillverkare: Victrix LTD

Mer från Victrix LTD

Referens: LBMS-MED4

Teutonic Knights barding and shields sheet to cover 12 horses and riders. These are to fit Victrix Medieval Knights.

All transfers come un-cut.

Guide on application of barding transfers:

Applying Barding transfers

The barding transfers have been laid out on the sheet showing back right, back left, front right and front left images that you apply to the appropriate quarters of the horse barding.

This has been abbreviated to BR, BL, FR, FL

The transfers have been designed to fit specific horse models and listed as Horse 1, Horse 2, Horse 3, Horse 4, Horse 5 and Horse 6.

Each transfer is tailored to the folds and creases of the appropriate horse.

In some cases, the design has a darker tone around it.

For example; the blue lion on the yellow background. You will notice this has a darker mustard coloured yellow around it. This is to enable you to butt up the yellow paint more easily to the transfer design without having to follow the intricate details of the edge of the design too closely. The darker yellow will then form some shading around the design.

There are appropriate shield designs to match each barding design.

Application

*ALWAYS APPLY TRANSFERS TO A WHITE SURFACE*

1) Cut out the transfer as neatly and as close to the design as possible using a sharp craft knife

2) Peel off the top plastic layer and turn the transfer over so you are looking at the paper backing of the transfer and stick the sticky surface side to the appropriate quarter of the horse

*PLEASE NOTE IF YOU MISPLACE THE TRANSFER BEFORE WETTING IT YOU CAN PEEL IT OFF AND PLACE IT AGAIN MANY TIMES IF NEEDED*

3) Once the transfer is in place press it down firmly and you can use the back of a brush or cocktail stick to really work the transfer into the creases and folds of the model. You can be very firm at this stage

4) Once the transfer has been worked into place simply apply water with a brush and the backing paper will slide away in a few seconds leaving the transfer in place

*Sometimes you may find and air pocket under the transfer causing a raised blister of bubble. Simply prick this area with a pin or the sharp point of the knife and press firmly with your thumb or fingers and this will flatten the area*

5) To hide the transfer edge you can use various methods. Build up the paint around the edges of the design, or use a few coats of gloss varnish to help build up the thickness at the edges and then paint around once dry.

179 kr

2 på postorder

Produkten befinner sig på vårt postorderlager.
Vill du istället hämta den i vår butik? Beställ före 10 så finns den att hämta i butiken från 16 samma vardag. Avhämtningar på helgdag måste beställas senast 10 föregående vardag.