Resin Stagnant Water (180ml)
Tvåkomponents vatteneffekt för dioramabygge
Tillverkare:
AK-Interactive
Referens: AK8231
Content: 180ML (120 resin + 60 hardener). Contains 2 syringes.
This is a two-component colored resin with low odor, intended to simulate standing water in sceneries, dioramas, etc.
The resin and hardener come in separate bottles with dispensing nozzles. Two syringes are included in the box.
Mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours.
The components should be mixed thoroughly, stirring the mixture. It is advisable to avoid stirring during the process to avoid the generation of air bubbles that will be trapped. Pour in an enclosed space without cracks to contain the liquid. Recommended thickness up to 5cm.
Instructions and guide are included in the box
269 kr
1 på postorder
Produkten befinner sig på vårt postorderlager.
Vill du istället hämta den i vår butik? Beställ före 10 så finns den att hämta i butiken från 16 samma vardag. Avhämtningar på helgdag måste beställas senast 10 föregående vardag.
Vill du istället hämta den i vår butik? Beställ före 10 så finns den att hämta i butiken från 16 samma vardag. Avhämtningar på helgdag måste beställas senast 10 föregående vardag.